| Specifications | ||||
| BALL: Our ball assemblies are made of 14 gauge gold or silver anodized aluminum, with an aluminum pulley and stainless steel fasteners mounted on an aluminum bushing that fits inside the flagpole. The Stationary ball assembly holds the flag stationary. One misconception is that a flag will wrap around the pole and tangle. The fact is that wind will change direction but eventually the wind stops and the flag returns to its neutral position. The Revolving trucking ball assembly can be used with internal or external halyard systems. The revolving trucking ball is designed with two sealed bearings (all parts are aluminum or stainless steel). The revolving trucking ball assembly can also be used with an external halyard. |
 |
Brass Snaps | $4.95 |  |
| Snap Covers | $4.00 | |||
| Pulley Alum | $15.95 | |||
| Cleat Nylon 3.5" | $6.50 | |||
| Cleat Chrome 4.5" | $15.00 | |||
| Cleat Alum 9" | $19.00 | |||
| Cleat Boxes | $150.00 | |||
| Plastic Chain | $.95 /ft | |||
| 1/4" Rope | $.40 /ft | |||
| 5/16" Rope | $.45 /ft | |||
| S/S Cable | $1.25 /ft | |||
| Flag Cable | $35.00 | |||
| Touch up Paint | $20.00 | |||
| Ring Assembly | $89.00 | |||
| Sock & Chain | $80.00 | |||
 |
Nylon Ball Ring | $70.00 | ||
| Shield 12" | $65.00 | |||
| 4" Stationary Ball | $75.00 | |||
| 6" Ball Only | $70.00 | |||
| 6" Stationary Ball | $100.00 | |||
| 6" Rotating Ball | $150.00 | |||
| 8" Rotating Ball | $250.00 | |||
| 12" Rotating Ball | $375.00 | |||
| HALYARD: External halyards are made up of (1) aluminum pulley, (2) chrome cleat 4.5" or aluminum 9" cleat, (3) superior quality white 1/4" or 5/16" tightly braided multi-filament nylon rope. The Economy flagpole configuration use #7 rope, the Step & Cone Taper flagpoles use #10 rope. Internal halyards (lock door) are made up of (1) counterweight and 5/16" aluminum retaining ring (2) flag attachment cable with bronze swivel snap hooks, 1/8" stainless steel 7/19" cable, (3) internal plastic chain with cleat, (4) aluminum flush mounted door and S/S lock. |
 |
Shoe &
Anchor Assembly
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Cone Taper flagpoles have a rectangle door size 3.5"x 5.25" and S/S lock. Larger flagpoles 50’-80’ have a slightly larger oval door. |  |
Sleeve
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Step
Taper flagpoles have a 2" round door and use a cam lock.
Economy: Internal Halyard is not available. Gearless Winch internal halyard is made up of (1) counterweight and 5/16" aluminum retaining ring, (2) flag attachment cable with bronze swivel snap hooks, (3) 1/8" stainless steel 7/19 cable, (4) stainless steel covered wire, (5) gearless winch and crank (cone taper only). |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Sleeve Base
|
Shoe,
Anchor Base
|
Tips The most protected (anti-theft) method of securing the flag is by attaching the flag directly to the flagpole, to change the flag, simply use the tilt base and lower the flagpole. Ropes can be used to raise a second flag at special times i.e. Christmas. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SHIELD: Spun aluminum alloy 6061, standard wall thickness .060 inch, wall thickness and diameter in accordance with pole size(3" to 12"), finished to match pole. Collars: Spun aluminum alloy 6061, standard wall thickness .060 inch, wall thickness and dia. in accordance with pole size, finished to match flagpole MOUNT: Embedded in-ground flagpoles are 20% stronger than shoe mount bases. Foundation sleeve is a galvanized 16 gauge tube with base plate & lighting spike. Anchor Bolt Assembly is galvanized steel and applied with bituminous paint, with a minimum pull out strength of 20,000 lbs. Thread size 5/8", ¾" and 1" dia. sized in accordance with flagpole size. Insert into concrete and level. Stationary Shoe Base requires a lift truck to place flagpole on anchor bolt assembly. If the anchor bolt is not level, extra levelling can occur at the shoe. Tilt Shoe Base has two purposes (1) effortless installation, only one person is required to raise the flagpole. (2) maintenance and decorating the pole for events is made easy. Tilt pins are stainless steel and sized in accordance with flagpole size. If the anchor bolt is not level, extra levelling can occur at the shoe. Aluminum Shoe: cast aluminum alloy A356, heat treated to T-6. The shoe is inserted onto the shaft and joined by a continuous circumferential weld. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||