Flag Outlet - Commercial & Residential Flagpole Manufacturer ~ Roof Mount Poles

Roof Mounted Flagpoles

Poles:
Standard 1"x 0.040" polished aluminum flagpole, comes in two parts, one part is swedged to fit into the other half of the flagpole. The recommended flag size for 8' flagpole is 3'x 6' or 27"x 54" (Rated at 50 MPH with 3'x 6' flag)
Tip: The flagpole should be longer than the length of the flag so it does not hit the building.

Premium:
1"x .113" aluminum flagpole, satin brush finish, one piece. Wall thickness is 0.113". (Pulley, rope & cleat available at an additional cost)

Heavy Duty
1.5"x 0.125" aluminum flagpole, satin brush finish, one piece or joined at the centre. Wall thickness is 0.125". Includes pulley, rope and cleat (price will reduce if not required)

Pole Tops:
Polished brass vacuum plated plastic acorn top for 1" and 1.5" poles.

Type	OD	Wall	6'	8'	10'	12'	Pole Top
Standard	1"	.040"	N/A	$25.50	N/A	N/A	$5.25
Premium	1"	.113"	$30.00	$35.00	$40.50	N/A	$7.95
Heavy Duty	1.5"	.125"	$59.00	$73.60	$89.50	$99.90	$12.95

Roof Mount Bracket: use No.10 stainless steel screws 2" long. Most flat roof buildings have an 8" wide piece of wood under the sheet metal that goes around the perimeter of the building, this is where the bracket is screwed into. Use silicon or any sealer on the screw to seal the joint.

Bracket	Fits Standard Poles	Price
701050	Single Maple Leaf	$25.00
701020	Stamped Steel Bracket	$9.95
701025	Light duty Aluminum bracket	$7.95
701010	Cast Alum Bracket	$16.95

Bracket	Fits Standard & Premium Poles	Price
701115	Single Side holder	$25.00
701110	Single Holder (90º)	$25.00
701120	Single Holder (45º)	$25.00
701130	Double Holder	$32.00
701140	Triple Holder	$38.00

Heavy Duty Brackets - for 1.5" dia. flagpoles
All steel HD brackets standard powder coated colours are white and black. Should you require a colour other than these, please contact the flagpole department for a quotation.

Bracket	Fits Heavy Duty Poles	Price
701210	HD Single Holder 1.5" (90º) - Steel	$50.00
701215	HD Single Holder 1.5" (90º) - Alum	$70.00
701220	HD Single Holder 1.5" (45º) - Steel	$50.00
701225	HD Single Holder 1.5" (45º) - Alum	$70.00
701230	HD Sgl Side Holder 1.5" (90º) - Steel	$50.00
701240	HD Sgl Side Holder 1.5" (90º) - Alum	$70.00

STANDARD BRACKETS, POLES AND HARDWARE ARE AVAILABLE FOR PURCHASE ONLINE!! Click Here

FLAG OUTLET 1 (800) 760-3524