skip to: page content | links on this page | site navigation | footer (site information)

FLAG OUTLET 1 (800) 760-3524

Home | Contact|Downloads
Cone Tapered Poles | Step Tapered Poles | Economy Poles | Banner Poles | Nautical Poles
Wall Mount Poles
Roof Mount Poles | Outrigger Poles
Aluminum & Fasteners
Material & Finishing Specs | Balls, Halyards & Bases Specs
Canadian Flags| USA & State Flags | Specialty Flags | Indoor Poles & Hardware | Misc Products
subglobal7 link
subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link

small logo

Wall Mount Flagpoles
Material:
  6063 T-6 Aluminum
Halyard:
  Standard External Halyard Rope & Cleat
Deluxe Internal Halyard (Lock & Door)*
Ball:
  Stationary Ball
Rotating Trucking Ball *
Finish:
  Brush Finish
Clear Anodize *
Black Anodize *
Powder Coated *
Mount:
  Collar Bracket
Heavy Duty Bracket
* Optional

Overall Size
Price
Top
Butt
Wall
Suggest. Flag Size
Internal Halyard
Rotating Ball
Clear Anodize
Heavy Duty Bracket
Shield
12' Economy
$240
3"
3"
.125"
3'x 6'
N/A
$100
N/C
$95 ea.
$30
12' Cone Taper
$270
2"
3"
.125"
3'x 6'
N/A
$100
$65
$95 ea.
$30
15' Economy
$280
3"
3"
.125"
45"x 90"
N/A
$100
N/C
$95 ea.
$30
17' Cone Taper
$399
1.875"
3"
.125"
45"x 90"
N/A
$100
$77
$95 ea.
$30
20' Economy
$437
3"
3"
.125"
45"x 90"
N/A
$100
N/C
$95 ea.
$30
25' Economy
$525
3"
3"
.125"
4.5'x 9'
N/A
$150
N/C
$95 ea.
$30
25' Step Taper
$615
3"
3.5"
.250"
4.5'x 9'
$175
$150
N/C
$115 ea.
$30
25' Cone Taper
$575
2"
4"
.125"
4.5'x 9'
$200
$150
$175
$130 ea.
$30
25' Cone Taper
$725
3"
5"
.125"
4.5'x 9'
$200
$150
$175
$130 ea.
$30
Wall Mount Brackets
       
   
       
   
       
       
       

Size of Pole
Diameter of Bolt
Length of Bolt
Distance Between Brackets
Depth of Hole
Bolt into Hole
12'
1/2"
4.5"
8"
3 3/4"
3"
15'
1/2"
5.5"
12"
5.25"
4"
17'
1/2"
5.5"
14"
5.25"
4"
20'
5/8"
6"
14"
5 1/4"
4.5"
22'
5/8"
6.25"
14"
5.75"
5"
25'
3/4"
6.25"
16"
5.75"
5"

Installation of Heavy Duty Bracket
Heavy Duty Brackets are available for all wall mount flagpoles. Each bracket uses two SS wedge anchors to fasten to the wall.

Installation: Use thru, wedge, sleeve or epoxy fasteners for your base material. Drill (note chart) and install brackets, then insert flagpole. The pole fits into the bracket and is secured with set screws. Use Loctite 262 and tighten the anchor 3-4 turns. Do not over tighten.
Epoxy Anchor: Have all holes drilled in advance, this is fast drying.
Sleeve Anchor: Insert bolt onto bracket, then into drilled hole.
Wedge Anchor: Leave adequate threads exposed for nut, washer and bracket.
Thru-wall Anchor: Drill hole through wall. Threaded rod, 2 nuts
Lag Bolt: Drill pilot holes to prevent wood from cracking.
Contact Flag Outlet for complete installation instructions.
About Us | Site Map | Privacy Policy | Contact Us | ©2009/2010 Flag Outlet Ltd.