top left white curve

Canadian flag

Anchoring Specs


Flagpole anchoring with tilt base

Shoe & Anchor Assembly
Exposed Height "A" "B"
25' 42" 14"
30' 42" 16"
35' 42" 18"
40' 54" 18"
 
Flagpole anchoring sleeve

Sleeve
Exposed Height "A" "B" "C"
35' 48" 24" -
40' 54" 30" 30"
50' 60" 36" 42"
60' 72" 36" -
70' 84" 48" 42"
80' 96" 48" 48"

Sleeve Base
Height Butt Wall Max Unflagged Windspeed Max Flag Size Flagged Windspeed
25' 5" .125" 233 KPH 4.5'x 9' 167 KPH
30' 5" .125" 180 KPH 4.5'x 9' 130 KPH
35' 5" .156" 140 KPH 5'x 10' 120 KPH
40' 5" .156" 145 KPH 45"x 90" 130 KPH
50' 8" .188" 195 KPH 9'x 18' 150 KPH
60' 10" .188" 240 KPH 9'x 18' 170 KPH
70' 10" .312" 225 KPH 15'x 30' 145 KPH
80' 12" .375" 280 KPH 15'x 30' 210 KPH
 
Shoe, Anchor Base
Max Unflagged Windspeed
Max Flag Size
Flagged Windspeed
195 KPH 5'x 10' 146 KPH
154 KPH 3'x 6' 120 KPH
130 KPH 3'x 6' 95 KPH
130 KPH 45"x 90" 115 KPH
164 KPH 45"x 90" 135 KPH
172 KPH 5'x 10' 140 KPH
188 KPH 7.5'x 15' 140 KPH
237 KPH 7.5'x 15' 175 KPH

Tips:
The most protected (anti-theft) method of securing the flag is by attaching the flag directly to the flagpole, to change the flag, simply use the tilt base and lower the flagpole. Ropes can be used to raise a second flag at special times i.e. Christmas.

SHIELD:
Spun aluminum alloy 6061, standard wall thickness .060 inch, wall thickness and diameter in accordance with pole size(3" to 12"), finished to match pole.
Collars: Spun aluminum alloy 6061, standard wall thickness .060 inch, wall thickness and dia. in accordance with pole size, finished to match flagpole

MOUNT:
Embedded in-ground flagpoles are 20% stronger than shoe mount bases. Foundation sleeve is a galvanized 16 gauge tube with base plate & lighting spike.
Anchor Bolt Assembly is galvanized steel and applied with bituminous paint, with a minimum pull out strength of 20,000 lbs. Thread size 5/8", ¾" and 1" dia. sized in accordance with flagpole size. Insert into concrete and level.
Stationary Shoe Base requires a lift truck to place flagpole on anchor bolt assembly. If the anchor bolt is not level, extra levelling can occur at the shoe.
Tilt Shoe Base has two purposes (1) effortless installation, only one person is required to raise the flagpole. (2) maintenance and decorating the pole for events is made easy. Tilt pins are stainless steel and sized in accordance with flagpole size. If the anchor bolt is not level, extra levelling can occur at the shoe.
Aluminum Shoe: cast aluminum alloy A356, heat treated to T-6. The shoe is inserted onto the shaft and joined by a continuous circumferential weld.

About Us | Site Map | Privacy Policy | Contact Us | ©2018 Flag Outlet Ltd.

Home | Contact | Downloads
Flag Outlet Ltd.